JUNG Hydraulische Hebetechnik GmbH - Waiblingen

Sturdy castors for any application

JUWAthan®plus/ JUWAmid/ JUWAthan® Professional/Steel

	K-Series		S-Series				JKB
	K-Series Professional		H-Series		K-Series		JKB
	G-Series		H-Series		S-Series		JKB 1
JUWAthan®plus		JUWAthan		Steel		JUWAmid

Recommended use
	Castor type and coat
Recommended use for	JUWAthan® JUWAthan® plus JUWAthan® Professional	Steel
Plain and clean floors	x
For any floors, swarf resistant	x
Bad floors with roughness		x

System series	Load capacity kg / lbs	D/L/d	JUWAthan® plus 24 months warranty*	JUWAthan® Professional 24 months warranty*	Steel

K-Series up to 24 to	750/ 1 650	85 x 85 x 25	95 050 057-V		95 050 043-S
K-Series Professional up to 28 to	750/ 1 650	85 x 85 x 25		95 050 089-D
G-Series up to 80 to	2 000/ 4 400	140 x 120 x 35	95 050 048-V


System series	Load capacity kg / lbs	D/L/d	JUWAthan® 24 months warranty*	JUWAmid	Steel
S-Series up to 48 to	1 500/ 3 300	90 x 120 x 35	95 050 025-V		95 050 026-S
H-Series up to 120 to	2 100/ 4 620	200 x 85 x 70	95 050 090-V
H-Series up to 120 to	4 200/ 9 240	200 x 170 x 70	95 050 053-V
JKB 1 up to 4 to	750/ 1 650	75 x 60 x 20		95 050 079-E
JKB up to 12 to	875/ 1 925	85 x 40 x 25		95 050 088-P


D = outside diameter, d = axis diameter, L = fitting length *When used as directed

Details
JUWAthan® castor design: The coating is molded around a steel core. Two precision ball bearings are pressed into the steel core. JUWAthan® plus castor design: Based on the JUWAthan roller, the new JUWAthan-plus castor has a new and improved coating material and a more advanced construction. NEW: An aluminum core replaces the steel core for easier handling at the same strength. A polyurethane based lining material is bonded around the aluminum core. This construction reduces the rolling resistance and weight by nearly 30 percent. JUWAthan® Professional: The professional series roller was developed based on the JUWAthan plus roller. The side-by-side double roller system provides higher load capacity (2x2 ball bearings) and offers greatly reduced rolling resistance. Turning of the steerable trolley requires less force because the rollers can turn against one another resulting in extremely reduced friction between surface and roller. The much lower friction resistance also causes the rollers on the rear axis to follow in a truer course. JUWAmid castor design: The coating is molded around a steel core. Two precision ball bearings are pressed into the steel core. Steel castor design: The steel body is made of a seamless steel tube. Two ball bearings are pressed into the body.